Top Coat Polyaspartic 60% Solids


ECP-TC-60 is a two-component, high solids, VOC compliant, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA).

$340.502 Gallon Kit


Primary Applications

  • Marine protection for fiberglass, steel, concrete or wood
  • UV-stable top coat
  • Aircraft hangar floors
  • Low temperature equipment
  • Maintenance facilities
  • Offshore platforms
  • Industrial shop floors
  • Car washes or wash bays
  • Secondary Containment
  • Cooling towers
  • Bridges
  • Wastewater treatment applications


  • Long pot life (80 min to 90 min)
  • Displays fast cure times with excellent adhesion
  • Superior chemical resistance
  • Superior abrasion resistance
  • Non yellowing and good gloss retention
  • Easy to mix 1:1 ratio by volume
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate
  • VOC complaint in Canada and the United States

Technical Data

Packaging litres / gal us Color
7.56 / 2 37.8 / 10 Part A Part B Mixture
Recommended Thickness Light Yellow Clear Light Yellow
Primer: EC-UP 8 mils / 200 ft² us gal Shelf Life
Topcoat on solid color:
10 mils / 160 ft² us gal
Topcoat on vinyl flakes:
10-12mils / 160-200 ft² us gal 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
Mix Ratio by volume
A : B = 1 : 1
*Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
Pot life (150g) Solids by weight % Density (kg/litre)
80-90 minutes 25°C > 75% Part A Part B Mixture
VOC (g/litre) Recommended Thinner 1.05-1.07 1.11-1.13 1.08-1.10
143.00 xylene Solids by weight %
Viscosity @ 25°C (cps) Part A Part B Mixture Part A Part B Mixture
500-600 80-100 125-150 85 65 75
Waiting time between coats
Min / 6 – 8 hours – max / 24 hours
Foot Traffic 24 hours
Light Traffic 48 hours
Chemical Resistance 72 hours
*Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity.