Orange Peel Finish Epoxy Resin
ECE-OP
ECE-OP is a 100% solid, two component epoxy coating. It provides a monochrome color with opaque and glossy finish, seamless, and a high covering power. ECE-OP provides excellent resistance to abrasion and chemical resistance. ECE-OP meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional. This seamless coating from Elite Coatings offers an unlimited choice of color. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.
This system is composed of:
- Optional: A coat of primer (ECE-LV or ECE-WDP)
- 1st coat of (ECE-CLEAR) 8 mils
- 2nd coat of (ECE-OP) 10-15 mils light texture or 20 mils medium texture
- Optional coves can be created
$247.613 Gallon Kit
Documents
Primary Applications
- Dry and humid treatment areas
- Commercial and industrial buildings
- Health care facilities
- Laboratories
- Surfaces where moderate mechanical and chemical resistance is needed
- Recreation centers
Advantages
- Contains 100% solids, allowing for interior applications without harmful odors
- Impermeable and seamless
- Anti-slip texture that is easy to clean
- Seamless coves can be shaped
- Dense surface resistant to bacteria and moisture and easy to clean
- Excellent adhesive properties, allowing for application on a wide variety of substrates
- May apply several layers on itself with excellent adhesion
Technical Data
| Packaging litres / gal us | Color | |||||
|---|---|---|---|---|---|---|
| 11.34 l / 3 | 15.9 l / 4.2 | 56.7 l / 15 | Part A | Part B | Mixture | |
| Recommended Thickness | Upon Request | Clear – Amber | Same as Part A | |||
| Primer: ECE-CLEAR | 8 mils / 200 ft² us gal | Shelf Life | ||||
| Finish Coat: ECE-OP | 20 mils / 80 ft² us gal | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards. | ||||
| Mix Ratio by volume | ||||||
| A : B = 2 : 1 | ||||||
| *Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. | ||||||
| ECE-CLEAR complies with the following LEED requirements IEQ Credit 4.2: Low emitting materials; Paints and coating SCAQMD Method 304-91 VOC content < 110 g / L |
||||||
| Pot life (150g) | VOC (g/litre) | Density (kg/litre) | ||||
| 50-60 minutes 25°C | 41.29 | Part A | Part B | Mixture | ||
| Solids by weight % | Recommended Thinner | Clear: 1.11-1.13 | 1.00-1.10 | – | ||
| 100% | xylene | Colored: 1.11-1.15 | 1.00-1.10 | – | ||
| Substrate Temperature | 10°C | 20°C | 30°C | |||
| Waiting Time / Overcoatability (min / max) | 16 / 48 | 8 / 24 | 6 / 24 | |||
| Curing Details | Foot traffic | 30 hours | 24 hours | 16 hours | ||
| Light traffic | 5 days | 3 days | 2 days | |||
| Full cure and chemical resistance | 10 days | 7 days | 5 days | |||
| *Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. | ||||||