Low Viscosity Epoxy Resin


ECE-LV is a 100% solid, two component epoxy primer coating system. Its low viscosity and slow cure allows for superior penetration in concrete substrates. Specifically designed as a primer for all Elite Coatings systems and as a binder for epoxy mortars. Clear or colored ECE-LV can also be used as a finish coat under circumstances where a longer pot life is required. Seamless plinths are optional. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.

$195.103 Gallon Kit


Primary Applications

  • Primer for all Elite Coatings coatings
  • Areas where the ambient temperature is above the norm
  • Binder for Elite Coatings epoxy mortars


  • Contains no solvent with a very low VOC content, allowing for interior applications without harmful odors
  • Superior penetration
  • Low viscosity
  • Impermeable and seamless
  • Seamless coves can be shaped
  • Dense surface resistant to bacteria and moisture and easy to clean
  • Excellent adhesive properties, allowing for application on a wide variety of substrates
  • May apply several layers on itself with excellent adhesion

Technical Data

Packaging litres / gal us Color
11.34 l / 3 15.9 l / 4.2 56.7 l / 15 Part A Part B Mixture
Recommended Thickness Upon Request Clear – Amber Same as Part A
Primer: ECE-LV 8 mils / 200 ft² us gal Shelf Life
Finish Coat: ECE-CLEAR 16 mils / 100 ft² us gal 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
Mix Ratio by volume
A : B = 2 : 1
*Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
ECE-LV complies with the following LEED requirements
IEQ Credit 4.2: Low emitting materials; Paints and coating
SCAQMD Method 304-91
VOC content < 110 g / L
Pot life (150g) VOC (g/litre) Density (kg/litre)
60-65 minutes 25°C 41.77 Part A Part B Mixture
Solids by weight % Recommended Thinner Clear: 1.10 -1.12 0.9-1.0
100% xylene Colored: 1.10-1.15 0.9-1.0
Substrate Temperature 10°C 20°C 30°C
Waiting Time / Overcoatability (min / max) 16 / 48 8 / 24 6 / 24
Curing Details Foot traffic 30 hours 24 hours 16 hours
Light traffic 5 days 3 days 2 days
Full cure and chemical resistance 10 days 7 days 5 days
*Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity.