Fast Cure Low Temperature Epoxy Resin


ECE-LT is a 100% solid, two component epoxy coating, designed for low temperature applications. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECE-LT provides excellent resistance to abrasion and chemical resistance. ECE-LT meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional. This seamless coating from Elite Coatings offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA).

$500.004 Gallon Kit


Primary Applications

  • Refrigerators
  • Refrigerated warehouses
  • Food processing plants


  • Contains no solvent, allowing for interior applications without harmful odors
  • Impermeable and seamless
  • Can be used at low temperature up to 0⁰C
  • Fast return to service if applied at room temperature
  • Very good chemical resistance
  • Seamless coves can be shaped
  • Dense surface resistant to bacteria and moisture and easy to clean
  • Excellent adhesive properties, allowing for application on a wide variety of substrates
  • May apply several layers on itself with excellent adhesion

Technical Data

Packaging litres / gal us Color
15.12 / 4 75.6 / 20 Part A Part B Mixture
Recommended Thickness Upon Request Amber Same as Part A
Primer: ECE-LT 8 mils / 200 ft² us gal Shelf Life
Finish Coat: ECE-LT 16 mils / 100 ft² us gal 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
Mix Ratio by volume
A : B = 3 : 1
*Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
Pot life (150g) VOC (g/litre) Density (kg/litre)
10-15 minutes 25°C Part A Part B Mixture
Solids by weight % Recommended Thinner Clear: 1.11-1.13 1.10-1.12
100% xylene Colored: 1.11-1.15 1.10-1.12
Substrate Temperature 0°C 5°C 23°C
Waiting Time / Overcoatability (min / max) 1 / 1.5 1.5 / 2 1.7 / 2.5
Curing Details Foot traffic 10 hours 8 hours 4 hours
Light traffic 24 hours 18 hours 12 hours
Full cure and chemical resistance 10 days 7 days 5 days
*Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity.