Flexible Epoxy Topcoat Resin


ECE-FT is a solventless, two components, epoxy-polyurethane coating, that exhibits excellent appearance and physical properties. It was specifically designed to be used as a wear coat for the ECE-WM membrane. This system has been approved by the Canadian Food Inspection Agency (CFIA). This product can be used to combination with silica sand for trowel application or it can be used as a finish coat. It meets LEED standards.

$320.234.2 Gallon Kit


Primary Applications

  • Humid and dry treatment areas
  • Commercial and industrial buildings
  • Health care facilities
  • Parking decks
  • For floors that require moderate mechanical and chemical resistance
  • Recreational centers


  • Contains 100% solids allowing for interior applications without harmful odors
  • Impermeable and seamless
  • Flexible
  • Seamless coves can be shaped
  • Dense surface resistant to bacteria and moisture and easy to clean
  • Excellent adhesive properties, allowing for application on a wide variety of substrates
  • May apply several layers on itself with excellent adhesion

Technical Data

Packaging litres / gal us Color
11.34 l / 3 15.9 l / 4.2 56.7 l / 15 Part A Part B Mixture
Recommended Thickness Upon Request Clear – Amber Same as part A
Primer: ECE-WM 20 – 30 mils
Finish Coat: ECE-FT 20 – 30 mils Shelf Life
12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
Mix Ratio by volume
A : B = 2 : 1
*Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
ECE-FT complies with the following LEED requirements
IEQ Credit 4.2: Low emitting materials; Paints and coating
SCAQMD Method 304-91
VOC content < 110 g / L
Pot life (150g) VOC (g/litre) Density (kg/litre)
50-60 minutes 25°C 40.10 Part A Part B Mixture
Solids by weight % Recommended Thinner Colored: 1.11-1.13 0.90-1.00
100% xylene
Substrate Temperature 10°C 20°C 30°C
Waiting Time /Overcoatability (min / max) 16 / 48 8 / 24 6 / 24
Curing Details Foot traffic 30 hours 24 hours 16 hours
Light traffic 5 days 3 days 2 days
Full cure and chemical resistance 10 days 7 days 5 days
*Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity.