Standard Almond Colored Epoxy
ECE-65
ECE-65 is a 100% solid, two component epoxy coating. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECE-65 provides excellent resistance to abrasion and chemical resistance. ECE-65 meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional. This seamless coating from Elite Coatings offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards. ECE-65 also meets FDA and USDA requirements.
$210.713 Gallon Kit
Documents
Primary Applications
- Aircraft hangers
- Assembly areas
- Classrooms
- Clean rooms
- Laboratories
- Areas of light manufacturing
- Mechanical rooms
- Walkways
Advantages
- Contains no solvent with a very low VOC content, allowing for interior applications without harmful odors
- Impermeable and seamless
- Seamless coves can be shaped
- Dense surface resistant to bacteria and moisture and easy to clean
- Excellent adhesive properties, allowing for application on a wide variety of substrates
- May apply several layers on itself with excellent adhesion
Technical Data
| Packaging litres / gal us | Color | |||||
|---|---|---|---|---|---|---|
| 11.34 / 3 | 15.9 /4.2 | 56.7 / 15 | Part A | Part B | Mixture | |
| Recommended Thickness | Upon Request | Clear – Amber | Same as Part A | |||
| Primer: ECE-65 | 8 mils / 200 ft² us gal | Shelf Life | ||||
| Finish Coat: ECE-65 | 16 mils / 100 ft² us gal | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards. | ||||
| Mix Ratio by volume | ||||||
| A : B = 2 : 1 | ||||||
| *Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. | ||||||
| ECE-65 complies with the following LEED requirements IEQ Credit 4.2: Low emitting materials; Paints and coating SCAQMD Method 304-91 VOC content < 110 g / L |
||||||
| Pot life (150g) | VOC (g/litre) | Density (kg/litre) | ||||
| 50-60 minutes 25°C | 41.77 | Part A | Part B | Mixture | ||
| Solids by weight % | Recommended Thinner | Clear: 1.11-1.13 | 0.9-1.0 | – | ||
| 100% | xylene | Colored: 1.11-1.15 | 0.9-1.0 | – | ||
| Substrate Temperature | 10°C | 20°C | 30°C | |||
| Waiting Time / Overcoatability (min / max) | 16 / 48 | 8 / 24 | 6 / 24 | |||
| Curing Details | Foot traffic | 30 hours | 24 hours | 16 hours | ||
| Light traffic | 5 days | 3 days | 2 days | |||
| Full cure and chemical resistance | 10 days | 7 days | 5 days | |||
| *Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. | ||||||