Waterborne Urethane Cementitious Top Coat
EC-WUCT is a self-leveling, medium to heavy duty, three-components, water dispersed polyurethane-based cement and aggregate screed. Installed at a thickness between 10-15mils, EC-WUCT is designed to be used as a top-coat for the EC-WUSCL coating. EC-WUCT is also used to protect new or deteriorated floors and provides excellent resistance against compression, abrasion, impacts and chemicals. It meets all kinds of requirements such as durability and performance. EC-WUCT-30 can replace the EC-WUCT in situations where a UV-resistant topcoat is required. These coatings from Elite Coatings offer a choice of anti-slip finish, from very fine to very aggressive, by broadcasting silica sand into the wet coating. This system has been approved by the Canadian Food Inspection Agency (CFIA).
$159.523 Kilogram Kit
Documents
Primary Applications
- Food processing plants
- Dry or humid food sector
- Refrigerated area
- Freezers
- Refineries
- Waste treatment plants
- Laboratories
- Areas of light to heavy manufacturing
- Mechanical rooms
- Areas of high circulation
- Etc.
Advantages
- Low odor, allows for interior applications without harmful odors
- Thermal shock resistant when used in combination with EC-WUSCL
- Ideal for correcting and reinforcing concrete surfaces
- Superior compression strength
- Impact resistant
- Impermeable and seamless
- Seamless coves can be shaped
- Dense surface resistant to bacteria and moisture and easy to clean
- Excellent adhesive properties, allowing for application on a wide variety of substrates
- May apply several layers on itself with excellent adhesion
Technical Data
| Packaging (WUCT-CP/CP30) | Color | |||||||
|---|---|---|---|---|---|---|---|---|
| Part A | Part B | Part C | Mixture | |||||
| Packaged A : B : C 1.5 kg A : 1.5 kg B : 1.5 kg C 4.5 kg (3.3 L) unit / 10 lb. (0.9 US gal.) unit |
3 colors available: Terracotta Grey Beige |
Amber | White | Same as Part A | ||||
| Yield (EC-WUCT/EC-WUCT-30) | Mix Ratio by volume | |||||||
| 14 m2 (150 ft2) per unit at 0.25 mm (10 mils) | A : B : C= Mix full units | |||||||
| *Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. | Application Temperature | |||||||
| 7⁰C (45⁰F) min. / 30⁰C (86⁰F) max. | ||||||||
| Density (kg/litre) (EC-WUCT/EC-WUCT-30) | Shelf Life | |||||||
| Part A | Part B | 12 months in original unopened factory sealed container. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards. Protect from freezing! |
||||||
| 1.10 – 1.25 | 1.16 – 1.22 | |||||||
| Pot Life (150 g) | VOC (g/L) EC-WUCT/EC-WUCT-30 | Hardness, Shore D | ||||||
| 20-25 minutes | < 10 | 80 (after 7 day cure) | ||||||
| Waiting Time / Overcoatability (min / max) | 12 hours minimum / 24 hours maximum | |||||||
| Curing Schedule (EC-WUCT/EC-WUCT-30) @ 20⁰C | Foot Traffic | 14-16 hours | ||||||
| Light Traffic | 36-48 hours | |||||||
| Full cure and Chemical Resistance | 7 days | |||||||
| *Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. | ||||||||