Standard Epoxy Resin Clear

ECE-CLEAR

ECE-CLEAR is a 100% solid, two component epoxy coating. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECE-CLEAR provides excellent resistance to abrasion and chemical resistance. ECE-CLEAR meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional. This seamless coating from Elite Coatings offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards. ECE-CLEAR also meets FDA and USDA requirements.

$210.713 Gallon Kit

Documents

Primary Applications

  • Aircraft hangers
  • Assembly areas
  • Classrooms
  • Clean rooms
  • Laboratories
  • Areas of light manufacturing
  • Mechanical rooms
  • Walkways

Advantages

  • Contains no solvent with a very low VOC content, allowing for interior applications without harmful odors
  • Impermeable and seamless
  • Seamless coves can be shaped
  • Dense surface resistant to bacteria and moisture and easy to clean
  • Excellent adhesive properties, allowing for application on a wide variety of substrates
  • May apply several layers on itself with excellent adhesion

Technical Data

Packaging litres / gal us Color
11.34 / 3 15.9 /4.2 56.7 / 15 Part A Part B Mixture
Recommended Thickness Upon Request Clear – Amber Same as Part A
Primer: ECE-CLEAR 8 mils / 200 ft² us gal Shelf Life
Finish Coat: ECE-CLEAR 16 mils / 100 ft² us gal 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
Mix Ratio by volume
A : B =  2 : 1
*Please note that the indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
ECE-CLEAR complies with the following LEED requirements
IEQ Credit 4.2: Low emitting materials; Paints and coating
SCAQMD Method 304-91
VOC content < 110 g / L
Pot life (150g) VOC (g/litre) Density (kg/litre)
50-60 minutes 25°C 41.77 Part A Part B Mixture
Solids by weight % Recommended Thinner Clear: 1.11-1.13 0.9-1.0
100% xylene Colored: 1.11-1.15 0.9-1.0
Substrate Temperature 10°C 20°C 30°C
Waiting Time / Overcoatability (min / max) 16 / 48 8 / 24 6 / 24
Curing Details Foot traffic 30 hours 24 hours 16 hours
Light traffic 5 days 3 days 2 days
Full cure and chemical resistance 10 days 7 days 5 days
*Note: Times and data mentioned are based on laboratory conditions. Field results may vary and will be affected by changing ambient conditions, especially changes in temperature and relative humidity.